General purpose enamel. (Line 100)
Comolux® Enamel is an oxidative drying enamel based on a modified alkyd, possessing good weather resistance properties. Comolux® Enamel is applicable as finishing coat in all alkyd systems for wood and metal substrates.
Metal, equipment, machinery, marine exposures (above water), railings, piping, doors, cabinets, storage tanks, metal buildings, fences, general maintenance painting.
Color card shades / AVF Paints color system.
Brush, roller or airless spray.
1/16 US Gallon (0.236 Liters).
¼ US Gallon (0.945 Liters).
1 US Gallon (3.785 Liters).
5 US Gallon (18.93 Liters). *Special request*
Clean brushes and rollers thinner #902 after use.
Use with adequate ventilation. Avoid contact with eyes and repeated contact with skin. Wear eye protection and gloves during application.
If you experience difficulty in breathing, leave area immediately. In case of eye contact, flush with plenty of water. In case of ingestion, do not induce vomiting. Get medical help immediately.
Surface must be clean, free of loose paint, chalk, grease and dust. Patch damaged areas and chalk open joints. If any areas are peeled, cracked or blistered, the condition causing this must be corrected for successful painting. Metal parts such as nail heads, should be wiped clean and primed with the appropriate metal primer. New plasterwork (PH greater than 10) has to cure properly and should be primed with one (1) or two (2) coats of AVF Wall Sealer. If mildew is present remove all traces with a solution of Ammonia. CAUTION: use protective clothing and work goggles when applying Ammonia solution. WARNING! Scraping or sanding of old paint may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS. PREGNANT WOMEN SHOULD AVOID EXPOSURE. New plaster must be allowed to cure (30-60 days).