A quick drying, single pack anti-corrosive primer for steel, suitable for use under a wide variety of conventional finishes, with excellent adhesion and ease of application. (Line 407)
AVF Phosphate Primer is a high quality oxidative drying anti corrosive primer, based on a modified alkyd and pigmented with Zinc Phosphate. AVF Phosphate Primer is applicable in relatively high film thickness. AVF Phosphate Primer is free of lead and chromate hazards.
Excellent for both non-ferrous metals (aluminum, galvanized) and ferrous metals.
Brush, roller or airless spray.
¼ US Gallon (0.945 Liters).
1 US Gallon (3.785 Liters).
Clean brushes and rollers with thinner #902 after use.
Use with adequate ventilation. Avoid contact with eyes and repeated contact with skin. Wear eye protection and gloves during application.
If you experience difficulty in breathing, leave area immediately. In case of eye contact, flush with plenty of water. In case of ingestion, do not induce vomiting. Get medical help immediately.
Ensure surfaces are sound, dry and free from grease, wax and oil. Use a suitable oil & grease remover to clean the surface if necessary. Remove all loose or defective paint. Remove all loose scale and rust by thorough scraping and wire brushing. Where necessary or specified surfaces should be blast cleaned to specifications, to give an appropriate surface profile. WARNING! Scraping or sanding of old paint may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS. PREGNANT WOMEN SHOULD AVOID EXPOSURE. New plaster must be allowed to cure (30-60 days).