Transparent two component sealer. (Line 315)
AVF Concrete Sealer is a transparent non-saponifiable sealer. AVF Concrete Sealer will prevent absorption of finishing coats into substrates.
To be applied on concrete and untreated asbestos cement.
Note: Do not apply at a relative humidity of over 80%.
Brush, roller or airless spray.
¼ US Gallon (0.945 Liters).
1 US Gallon (3.785 Liters).
Clean brushes and rollers with Thinner #316 or Thinner #290 after use.
Use with adequate ventilation. Avoid contact with eyes and repeated contact with skin. Wear eye protection and gloves during application.
If you experience difficulty in breathing, leave area immediately. In case of eye contact, flush with plenty of water. In case of ingestion, do not induce vomiting. Get medical help immediately.
Surface must be clean, free of loose paint, chalk, grease and dust. Patch damaged areas and chalk open joints. If any areas are peeled, cracked or blistered, the condition causing this must be corrected for successful painting. Metal parts such as nail heads, should be wiped clean and primed with the appropriate metal primer. If mildew is present remove all traces with a solution of Ammonia. CAUTION: use protective clothing and work goggles when applying Ammonia solution. WARNING! Scraping or sanding of old paint may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS. PREGNANT WOMEN SHOULD AVOID EXPOSURE.