Leaving a smooth surface. (Line 605)
AVF Estuco Interior may be used for coating walls and ceilings and to cover less visually appealing construction materials such as concrete, cinder block and brick leaving a smooth surface. AVF Estuco Interior can also be used as a decorative finish. No sanding required.
Concrete, cinder block and brick. Can also be used to seal joints between sheets of drywall, primarily in building construction. Only for interior use.
1 Gallon of 6 Kg.
5 Gallons of 30 Kg.
Clean brushes and rollers with clean water after use.
Use with adequate ventilation. Avoid contact with eyes and repeated contact with skin. Wear eye protection and gloves during application.
If you experience difficulty in breathing, leave area immediately. In case of eye contact, flush with plenty of water. In case of ingestion, do not induce vomiting. Get medical help immediately.
Surface must be clean, free of loose paint, chalk, grease and dust. Patch damaged areas and chalk open joints. If any areas are peeled, cracked or blistered, the condition causing this must be corrected for successful painting. Metal parts such as nail heads, should be wiped clean and primed with the appropriate metal primer. New plasterwork (PH greater than 10) should cure properly and should be primed with one (1) or two (2) coats of AVF Wall Sealer. If mildew is present remove all traces with a solution of Ammonia. CAUTION: use protective clothing and work goggles when applying Ammonia solution. WARNING! Scraping or sanding of old paint may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS. PREGNANT WOMEN SHOULD AVOID EXPOSURE. New plaster must be allowed to cure (30-60 days).