A highly durable, quick drying coating suitable for use on bituminous road surfaces. (Line 331)
A specially modified alkyd resin based paint containing rutile titanium dioxide and silicate pigmentation, with excellent hiding power and after adding glass beads superb reflecting properties.
Asphalt and concrete. For reflective properties, the road marking paint should be mixed with glass beads in the ratio 2:1. The glass beads could also be sprinkled into the wet coat. The mixing beads should be 200µm in diameter and the sprinkle beads 300 µm in diameter.
Brush, roller or airless spray.
1 US Gallon (3.785 Liters).
5 US Gallon (18.93 Liters).
Clean brushes and rollers with Thinner #995 after use.
Use with adequate ventilation. Avoid contact with eyes and repeated contact with skin. Wear eye protection and gloves during application.
If you experience difficulty in breathing, leave area immediately. In case of eye contact, flush with plenty of water. In case of ingestion, do not induce vomiting. Get medical help immediately.
The surface to be coated must be clean, free from dirt, dust, oil and grease etc. Apply Road Marking Paint and leave to dry for as long as is practically possible. It must be noted that the longer the paint is allowed to dry and the rougher the surface to be coated, the longer the paint will last. The paint will be touch dry within +/- 30 minutes. This product can be applied directly to all clean, new or previously painted surfaces. WARNING! Scraping or sanding of old paint may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS. PREGNANT WOMEN SHOULD AVOID EXPOSURE.