Print:

Protective Coatings

View our heavy duty maintenance systems with a product line consisting of epoxies, polyurethanes, zinc primers, heat resistant coatings and epoxy phenolic with product usage information and technical data sheets.

AP-ZINC

  • Description
  • Recommended for
  • Application Data
  • PDF

An inorganic, permanent type primer that protects steel galvani- cally. AP-ZINC has good application properties and prevents under- cutting type corrosion. AP-ZINC is especially suitable for cool humid environments (as low as -12°C and 95% humidity). At humidities less than 50% and temperatures below 21°C allow additional curing time before topcoating.

AP-LOCK

  • Description
  • Recommended for
  • Application Data
  • PDF

Although optimum performance is achieved over sandblasted surfaces this coating is surface tolerant. It may be applied over marginally prepared steel surfaces where it is not possible to abrasive blast. It may be applied over old and aged coating systems that have been hand-prepared, and are free of oil, contaminants and loose paint flakes. This coating is infinitely recoatable and can be topcoated with alkyds, epoxies or polyure- thanes. It offers excellent corrosion protection in moderate to severe conditions

AP-THANE

  • Description
  • Recommended for
  • Application Data
  • PDF

AP-THANE Polyurethanes are formulated from high performance acrylic resins. AP-THANE is known for their excellent gloss reten- tion properties and excellent resistance to a variety of solvents, acids and bases. AP-THANE Polyurethanes cure in environments as low as 5°C.

AP-CONE 480

  • Description
  • Recommended for
  • Application Data
  • PDF

 AP-CONE 480 Series primer/finishes are durable silicone coatings. AP-CONE 480 products are self-priming or available in a zinc filled system for severe environments. AP-CONE 480 products should be heat cured for maximum results.

AP-GUARD

  • Description
  • Recommended for
  • Application Data
  • PDF

AP-GUARD Epoxy Phenolic products are formulated for a tank- lining product that is both self priming and resistant to a very wide range of chemicals. AP-GUARD Epoxy Phenolics can be applied to steel, galvanize, aluminum, and concrete surfaces.

AP-THINNER SERIES

  • Description
  • Recommended for
  • Application Data
  • PDF

AP-THINNER Series are formulated for a multitude of purposes. These thinners vary drying times in coatings, are used for cleaning up equipment, and enhance brushing or rolling characteristics.

AP-THINNER 950

  • Description
  • Recommended for
  • Application Data
  • PDF

AP-THINNER 950 Chemical Cleaner is a phosphoric acid type cleaner, which effectively etches concrete and neutralizes iron oxides on steel. AP-THINNER 950 actually boils oil and grease out of pores of concrete or effectively removes oil and grease.